Technical advice for buyers

 This part of  our  www  is dedicated to  2 popular questions and subjects:

1) The minimum power of our system.  Below is in details a mathematical and physical discussion about  at least needed and  absolutely necesary power of  our  audio system (loudspekaers and amplifier) if we want to get  really not distorted and not limited in dynamic  playback in our home cinema or ultimate stereo system-  It gives the simple answer in the subject of  co called headroom and Crest factor of power of a very good audio home system.

 

2) In the second part of this page (  in English ) you will find our  advice how to make  much simpler our multichannel home cinema system but not loosing any quality. The system which is adjusted to our needs and our present  audio staff  which we allready  have got in our house.

 

Soon everything will be translated in to English. Please be patient.

 

 

  So....the fundamental question is:

If for  really  very high quality realistic  not distorted sound in our  house do we need  huge power ,  big  so called  headroom  of power in our audio system  and hundreds or  even thousends of Watts  or not.......?   How do you think?

Below  you have very simple  mathematical   answer dedicated to you  if you want to be a real audiophile.

 

 

 Fundamentalne pytanie brzmi: 

czy  dla WIERNEGO i NIEZNIEKSZTAŁCONEGO odtwarzania naszej ulubionej muzyki w domu trzeba dysponować realnie dużymi mocami systemu  czy też wystarczy nam zestaw  kupiony w choćby  w hipermarkecie i mający np 100  czy  "aż" 200  Watt....  poniżej przedstawimy  bardzo proste wręcz na poziomie szkoły podstawowej wyliczenia matematyczne i fizyczne (są to tzw wprawki dla kazego studenta czy inżyniera dźwiękowca):

 

Otóż w  dźwięku jaki słyszymy   w czasie gry np żywego zespołu, wokalisty, orkiestry, dowolnego instrumentu  czy grupy wykonawców  można scharakteryzować i określić miedzy innymi tzw  "wartość skuteczną sygnału"  (popularnie nazywaną RMS) powiązaną z  naszym słuchowym subiektywnym wrażeniem  głośności danego źródła dźwięku.   Jednak co pewien czas w wyniku  bardzo mocnego uderzenia np w instrument  występują także chwilowe  tzw "peaki"  (szpilki albo szczyty sygnału )  głośności naszego wykonawcy. Stosunek  tych nagłośniejszych  chwilowych momentów w  słuchanej przez nas muzyce  do jej  (typowej miłej dla naszego ucha  średniej( a raczej poprawnie nazywając "skutecznej") głośności nosi miano parametru CREST FACTOR  lub "CREST"  oznaczanego literką C.  Matematycznie ten stosunek C wylicza sie jako   iloraz mocy szczytowej   Ppeak    danej  muzyki do  jej mocy skutecznej  (tzw    PRMS  )

 

wg wzoru  C=  Ppeak/ Prms

 

a skoki napiecia   w naszych głośnikach  przy słuchaniu tej muzyki  wyrażone w decybelach   wtedy wyliczamy z   równania:

 

 

Cdb=20 log (Vpeak/Vrms 

 

W muzyce  parametr  CREST mówi nam zatem  jakim zapasem napięcia i MOCY do przesterowania musimy dysponować  w naszym sprzęcie kina domowego  lub stereo   by daną muzykę móc słuchać na prawdę  wiernie tj bez zniekształcania i obcinania  tzw "wierzchołków" lub "szczytów"  tj najgłośniejeszych  impulsów dźwiękowych  tj tak byśmy  mieli wrażenie, że skala dynamiki naszego wykonawcy z płyty CD  ma szansę być wierna  oryginałowi tj jego zagraniu  na żywo. Czyli że słuchamy  wiernie i audiofilsko.

Używając   np  oprogramowania Matlab  można łatwo przeanalizować  dowolny nasz ulubiony  materiał muzyczny  np z naszej ukochanej kolekcji  CD.   I tu dochodzimy do zasadniczego szokującego  wielu  niewtajemniczonych  wniosku. Podam parę przykładów z pomiarów i potem  proste wnioski:

 

Załóżmy  zatem tylko na początku  rozważań, że mamy w  domu  typowy domowy zestaw audio  o podanej przez producneta tzw efektywności   np 85 dB.     A lubimy słuchać nie zagłośno, tj tak by nam uszy nie "więdły"   i by sąsiadów nie "straszyć". Przyjmijmy zatem, że nasza  typowa i ulubiona głośność  słuchania jest powiedzmy.......taka bardzo przeciętna  tj   90dB SPL. To nie tak dużo wbrew pozorom. Większy  codzienny hałas jest na zwykłej ulicy  w małym mieście !

Wtedy    jeśli wziąć i sprawdzić jaki jest na naszej ukochanej muzyce  CREST factor    to dla przykładu  podam że dla:

 

 

 

1) Mszy   Emoll    Frantz'a Shubert'a     CREST FACTOR wynosi   ponad 23 dB   co daje NIEZBĘDNĄ MOC jaką musi oddać w najgłośniejeszym momencie nasz system   równą ponad......660  Watt  !!!!!!!!!!!!!!!!!!!! by posłuchac bez zniekszałcen fortissimo   !!!!!!!!!

 

2)   Orkiestry Glenna Millera   i utworu "Pensilvania "  z pomiaru wyszło   C=21,6dB   a więc   potrzebowac będziemy  ponad 456 Watt mocy z naszego systemu !!!!!!!!!!!!!

 

3) Muzyki Arona Coplanda wyjdzie nam z pomiaru  C= 20,5 dB  co da nam wymóg mocy  355 Watt  !!!!!!!!!!

itd.........

 

Prosze pamiętać  że powyższe wyliczenia dokonalismy dla założenia że w ogóle słuchamy dosyć cicho  tj na założonym uśrednionym  poziomie  90 dB SPL. A przecież   czasem  wielu z nas chciałoby posłuchać muzyki np rockowej  czy jazzowej  jak na prawdziwym koncercie, szczególnie gdy mamy  gości i jest  wesoło w domu.

 

To  kolejny gwóźdź do trumny  idei  małych mocy. Bo  jeśli tylko zechcemy zwiększyć   "uśredniony  typowy " poziom głośności naszego   odsłuchu o  zaledwie 3 dB tj z  90 na 93 dB    musimy zwiększyć moc naszego systemu  DWUKROTNIE bo każde  3dB SPL  więcej to  2 razy większa moc  niezbędna z systemu !!!!!!!  (  bo  P= U2/R      a SPL w dB=  20 log(  U2/U1)   tj wzory znane każdemu z liceum). A więc dla muzyki  Shuberta potrzebować będziemy  już  2X660 watt=   1320 Watt.  Hmmmmm

 

Jeśli zamarzy nam się  średni poziom  96 dB  w naszym pokoju i ciągle bez zniekształceń  w "szczytach"  potrzebować będziemy   zatem  2X1320Watt=  2640 Watt   itd.........

 

Dla przypomnienia-  na koncertach rockowych  młodzież stojąca pod sceną czasem "dostaje"  po uszach   pod 115-  125 dB SPL  głośniości................ No coments....

 

Sądzę że to proste wyliczenie i szkolna matematyka   da dużo do myślenia  każdemu kto chce zostać audiofilem  tj  miłosnikiem  wiernej jakości   dźwięku,   a także  zwolennikom .............. parunastowatowych systemów nazywających siebie szumnie też  audiofilami.  ...................................................

 

Niestety by ich system grał  w najgłośniejszych  impulsach muzyki  ciągle nie wchodząc w zakres jego zniekształceń i limitów  muszą oni  ściszyć go niezmiernie tak  i słuchać tak cicho jak sie słucha  muzyki z radia z Torunia   w domu   spokojnej trzeciej młodości............... Wtedy mają gwarancję audiofilską że nawet w najgłośnieszym momencie ich muzyka nie zostanie  zniekszałcona. Nie mnej w konsekwencji tego  przestają słyszeć wszelkie najcichsze  momenty i niunase zawarte w nagraniu (np wszelkie  ppp pianissimo)   bo stają sie one tak ciche,  że  zaczyna je maskować  otaczający ich  wszechobecny tzw  szum tła  otoczenia, choćby hałas lodówki w kuchni,  jak i  granice  czułości słuchu  ludzkiego  stają tu  też na nieprzekraczalnej  rubieży nie do przeskoczenia.

 

Zamykając  ten zaskakujący dla wielu   temat:

 

1)Miłośnicy systemów parunasto czy parudziesiecowatowych  czy nawet   stu watowych   raczej zatem nie mogą mówić o jakim kolwiek nawet zbliżonym do wiernego oryginałowi odsłuchu  i nazywać siebie miłosnikami audiofilskiego  słuchania muzyki........

 

2)  Druga  jeszcze ważniejsza konkluzja:  jeśli chcemy móc słuchać WIERNIE i  z WYSOKĄ JAKOŚCIĄ  MUSIMY MIEĆ w ZAPASIE w naszym systemie dobre setki Watt a lepiej nawet parę kilowatów mocy by słuchać jej bez zniekształceń. Wcale nie będziemy go  non stop  miec "otwartym" na maksimum  nie mniej  ten zapas gwarantuje nam  WIERNE słuchanie niezależnie od rodzaju  muzyki i tego jakie impulsy i szczyty tzw sygnału w niej wystąpią i jak CD czy DVD będzie nagrane.

 

ciekawe prawda?

 

TR

 

Here our  two  powerfull  analog amplifiers  which  are the best solution for  this problem of high power needed  for  any hi end system.    These two units  give  nearly  2500 Watts  RMS of power on  4 and on  2 Ohms.  and  each is 8 kg only!

 

 

-------------------------------------------------------------------------------------------------------------------

 

 

 

Our recommended home cinema and stereo solutions:

 

 

Our home cinema or music room  instalation may be very complicated  or....very simple and briliant in idea. What do you prefer?


Here we explain and advice you how to build simple yet very good home cinema systems. But before we  will explain possible ideas please look at real typical instalations at most of our homes.  As  sound engineers we do not accept these compromise in sound  and very complicated  ideas.

 

 

 

Typical -shown over- instalation is build on avarage sets of home cinema including subwoofer and central speaker.  These  added two or three speakers have many disadvantages.

Here some of them:

1)  In mid class loudspekaers as from shoping audio centre loudspeaker boxies very often are light and narrow what is very bad acustically and are made often of.....domestic plastics!! So they  can not generate any real high preasure. Specially is a tragedy on  bass. They are very often fine for computer games but not for hi fi audio in the high class home cinema of our luxary house....

 

2) Subwoofer- the theoretical solution for this serious  disadvantage of thiny main speakers. The whole idea of subwoofer was  based on very compromised conclusion that human ear basically  can not  well detect the direction of  low frequency sounds. To be honest this is  big compromise and  is not the true  if we are audiophiles and if we are thinking about really  high class  realistic  sound. What is more , this concept is based als on idea of totaaly mono bass wave generated from one point in our room. For any real musician or audiophile this is crazy idea. If we  are thinking about really high class vocals or high class reproduction of  acustic instruments  we have to forget about these compromises, we can not accept this idea of ONE bass source!! We all know that complex sound waves which  are going as a mixture of low and high frequencies from the real instrument are not the same  as  two independly generated waves=  one  only with low frequencies and the second without them. Acustically and mathematically there are big differencies. Other way saying: You can not divide  and  extract from a guitar  its resonance box  apart and away of strings and say  that it will sound the same !!!! It  sounds as a joke  if we are serious listeners.

 

3)  Adding left and right channels and geting one monophonic  bass  from one box standing somewhere in our big room is  next  big sound compromise not accepted by any serious sound engineer or  a sensitive listener. Not only well trainded musicians easly recognise the difference between mono bass from one   subwoofer and  real stereo  two bass sources  from two independend main left and righ loudspeakers. What is  worse- the proportion between bass generated from one subwoofer somewhere in pour room  and rest of sound spectrum from front and rear speakers  is greatly changing depending on our actual position as a listener in our room because of changing   complex geometry of distancies.For example: If we walk during listening- the  differnece of the distance from  subwoofers and main speakers can be still gratly changing as well in time. It can be real horror for a sensitive listener !

 

4)The central louspeaker-usually used for  speaker's voice was invated to make subiectively wider image of stereo and to get  bigger spread of  left and right main speakers against  to very mono sound of speaker voice from cental speaker. This is also of course next tricky game as from...... circuis.  Always is better to get  all  signals incuding voice speaker voice from  a set of  two very high quality full band loudspekaers that  to get the voice of the speaker from strange because  one more spekaer  located between two  main sources of sound.  Becasue it is  frustrasting for  many of us as listeneres  to hear the voice defenetely from one and very different localization than  all  rest of sound....... many of us know this crazy unwanted effect from  big room city cinemas......

 

5)Additional usually big boxies  of  subwoofer and  central speaker  are  nearly always  a big esthetic problem   for  our wifes and our families and for all of us who treat their cinema room  as nice and beautifull place  for  living not only for listening.

 

______________________________________________________________________________

 

And what  now?!

 

All  these disadvantages we may solve very easly and  by a few alternative easy ways. Always getting better sound, more perfect stereo and getting everything much simpler for a user ! 

 

Here  a few  possible ways  of improvement.  

 

we may go as:

 

1) Your amplituner A/V+ our  ZETA ZERO  loudspeakers ( 2 or 4 or 6 loudspeakers)

2) Your amplituner A/V as preamp+ our power amplifiers ZETA ZERO 1175 and loudspeakers ZETA ZERO

3) Our specializated ultra linear and ultra low noise  preamp  ZEAT ZERO1176+ power amplifiers ZETA  ZERO 1175 i+ loudspeakers ZETA ZERO.

 

 

 

 

ad 1) You have allready bought avarage or good class home cinema amplituner with enough good for you internal power amps. In this situation you only exchange "shop" mid class loduspeakers for   wide band ultra spectrum ZETA ZERO loudspeakers.  (these two pictures below show this situation- at the first  you use  internal amplifiers, at the second you use your external amplifiers)

 


 

 

 

 

 

In this system you simply exchange   mid class main front and rear loudspeakers  for ZETA ZERO's and you  may keep subwoofer and central or  turn them off.    You may do it in the "audio loudspeaker setup" menu of our DVD or Blue Ray.

 

____________________________________________________________________________

 

 

ad 2)The second option: when you have bought your home cinema amplituner system but you are not happy of its limited power apmlifiers.For example- because of too  low power or  other very mid class parameters. You may use your amplituner  as only preamplifier and not to use its internal poweramplifiers . In this situation you drive EXTERNAL great amplifiers such ZETA ZERO 1175 from its so called PRE-OUT outputs. In nearly all  good amplituners  are present so called multichannel audio "pre outs".

 

For real and  HIGH END home cinema comparable with real great Cinema you have to use real thousands of Watts of power in your  audio system. Unfortunatelly nearly no one amplituners can deliver  enough power or enough good sound on such high levels of power. Only dedicated external hi end powerfull amps can solve this problem properly as for example ZETA ZERO 1175 power amps .

 

 

 

OR......

 


 

 

 

 

 

 

_________________________________________________________________________________

 

 

ad3) The best and totally High End option: (on the picture below)  In this option all your home cinema  except sources are based on our technology including our ultralow noise multichannel PREamp. You do not have to use any market amplituner.  In this system you use our preamp 1176, our power amps 1175 and our loudspeakers. Thanks to this  you are getting incredible sound, icredible power and icredible easy...life.  Our preamp 1176 can send 5.1 to  5.1 or if you want  4.0  or only 2 channals. As desired. It can also decode 2 channals of simple stereo to  4 speakers giving ambient and spectral  sound  from simple stereo etc.    If you do not want,   you don't have to use subwoofer and central speakers. Of course you may use them  but it is not necessary- it is up to you. Our preamp 1176 gives you total freedom and in one second by ONE clever button (!!!) you may totally reconfigure  your multichannel home cinema to stereo  or vice versa as you wish depending of  the CD or DVD  content.

 

 

 

all  these  3 ideas give you great advantages:

- If you want You may remove from your luxary room unwanted boxies of  subwoofer and  central loudspeaker what is usually great news for your  .....wife !

- You remove  at least  2 or  3  heavy and thick loudpsepaer cables.

- you remove  phase and time shifts between subwoofer and main loudspeakers .

- you are getting perfect coherence and symbiose between ultralow frequency singals and rest of frequencies independly of your position in the room.

- You are gettinf  full  band isolation between left and right channels. No any signals are common for  left and rignt channel. Left channel singnals are played ONLY by left loudpspeaker. Right channel signals only by right loudspeaker etc....

- Bass sounds are  incoming from dedicated speakers from left and right , and not from  so called "uknown hell boom box !!"   as  for example so called audio systems in food hipermarket centers!

 

 

 

____________________________________________________________________________

 

So...........Due to its incredible abilities to play stereo plans and brilliant low frequencies Zeta Zero setbasically  DOES NOT require the central speaker and subwoofer  is also not needed.

 Additionally using our  dedicated ultralow noise  preamp 1176   your system becomes  extremally flexable  and  easy to use, does not matter what you need -stereo or  4 or  6 channels  instalation.

 

 

but we have two recommended system configurations

 

  1.            Stereo system configuration - 2 speakers

            If you use a DVD player in the menu select audio option "decode only for stereo signal - stereo type output"  

 

       2.            Multi-channel systemu configuration "surround sound”  i.e. 4 speakers in the corners of the room.

            In the case of using a DVD player with multi-channel audio output, in the player menu select option: 4-channel audio output, that is with SWITCHED OFF front and back center speakers and SWITCHED OFF subwoofer!

 

 

Recomended technology of amplifiers   :  You may use  nearly all kinds of amplifiers. No matter how small   power  is .  Zeta Zero speakers   have  enough high efficiency  so you may drive them   evne  from 8  Watt  tube amplifier.  But also you may use   up to 1000  Watts  chance to   extraordinary drivers  in Zeta Zero.There are only one in The World  ribbons  which can withstand this level of power.

Basically we  advice you to use  rather  analog amplifiers tan digital.

 

In digital amplifiers- where are present  on input DA or AD converters -distortions tend to rise  when music is going to be quiet.This is simple phenomen of digital conversion. 
Also  in typical analog  class  AB amplifiers  distortions  are rising when signal is  very low(because of characteristics of transistors).
In class  A  analog amplifiers distortions are  rapidly rising when signal is going to be high  so  from A class you can NOT get to much power.

 In ZETA ZERO  1175  amps    ALL these disanvantages of  class  A, class AB and digital amps with DA or AD converters  are avoided .  Additionaly  in  ZETA ZERO  1175  are   added all positive advantages of  class A, AB  and digital ideas.

ZETA ZERO amp  works  on totally different principia (different idea) than all of previously mentioned class independly,  and  it  does not has any of these disadvantages but collects all strong points together. So the sound is incredibly clear crispy, and extremally powerfull (if needed because of music content)

So go into World of ZETA ZERO ! Go to New World of Sound




If

• you are planning to order Zeta Zero system and you need some advice 
• you would like to request a unique custome-made set according to your needs
• have any questions as to the optimal choice of Zeta Zero set for your home
• you are a current user and have questions or you are planning to expand your existing audio system



send us e-mail or call our main technical adviser  to

trstudio@trstudio.com

distributors  >>>

Site TOP
•   Start   •   Home   •   New! Preamp Zeta Zero   •   Zeta Zero Amplifiers   •   Available models   •   Speakers and pricelist   •   Opinions of users/ listeners   •   Audio Show 2011 GALLERY   •   Product history   •   Our scientific field for Zeta Zero   •   Technical advice for buyers   •   Press News   •   Links   •   Contacts   •   For Investors   •  

created by DV studio & studiotomcom.pl
copyright © 2009